TSING SHAN STEEL INDUSTRIAL LIMITED
TSING SHAN STEEL INDUSTRIAL LIMITED
Add to Cart
Inconel 600 Plate 2000 mm long x 1000 mm Width x 5 mm 10mm thk
| Item | Inconel600 steel sheet,Inconel600 steel plate,UNS NO6600 Steel sheet,UNS NO6600 Nickel alloy steel sheet |
| Grade | Inconel600(Ni:72%min,Cr:14%-17%,Cu:0.5max,Fe:6-10%,Mn:1.0max, Si:0.5max,C:0.15 max) |
| Size | Thickness:0.3-100mm With:500mm,600m,1000mm,1500mm,2000mm,or as required Length:1-12m |
| Detail: | Elastic modulus :26 000 ksi Denisty:8.47g/cm3 Heating capacity :0.427 J/g-°C Thermal conductance:21.8 W/m-K Melting point :1354 - 1413°C |
| Specialty | 1. Has good resistance to reduction, oxidation, nitrogen medium corrosion performance, 2. When at room temperature and high temperature has good resistance to stress corrosion cracking performance 3. Has good resistance to dry chlorine and hydrogen chloride gas corrosion performance |
| corrosion resistance | Inconel 600 alloy chemical composition to be able to resist a variety of environmental corrosion. In the content of chromium alloy must be in the oxidation environment corrosion resistance is better than that of industrial pure nickel, of which high nickel content and its reduction environment also can maintain considerable of corrosion resistance. Alloy of nickel content also make the alkali solution with good corrosion resistance.The alloy to strong oxidizing acid solution with equal corrosion resistance. However, single dissolved air oxidation is insufficient to ensure full passive state and freedom from saturated air by inorganic acid certain concentration organic acid erosion |
| Application | 1. The pressurized water reactor steam generator tube; 2. Sodium hydroxide heat exchanger; 3. Used in the manufacture of photographic equipment and film flushing processing components; 4.Production of vinyl chloride oxide generator internal components; 5. Used for flight recorder of banding. |
| Price term | Ex-Work,FOB,CNF,CFR,CIF,etc |
| Export to | USA,Iran,India,Ukraine,Singapore,Indonesia,Spain,Brazil,Korea,Thailand,Canada,Sadui Arabia,Viet Nam,Oman,Peru,Spain,Russia,Italy,Chile,etc |
| Contact | If you have any question,please feel free to contact us. |
Plates, sheets and strips of ASTM B168 UNS N06600 may be furnished in the following conditions & surface finishes:
| Ni | Cr | Fe | Mn | C | Cu | Si | S |
|---|---|---|---|---|---|---|---|
| ≥72.0 | 14.0-17.0 | 6.0-10.0 | ≤1.0 | ≤0.15 | ≤0.50 | ≤0.50 | ≤0.015 |
| Condition | Tensile Strength, min., ksi [MPa] | Yield Strength, min., ksi [MPa] | Elongation min., in 50 mm, % |
|---|---|---|---|
| *A | 80 [550] | 35 [240] | 30 |
| *B | 125 [860] | 90 [620] | 2 |
*A refers to Inconel 600 plate, sheet, strip furnished in annealed condition.
*B refers to Inconel 600 materials furnished in hard condition.
*The hardness of Inconel 600 shall be tested and specified.
