TSING SHAN STEEL INDUSTRIAL LIMITED
TSING SHAN STEEL INDUSTRIAL LIMITED
Add to Cart
Incoloy 800 is primarily used in applications with temperatures up to 1100° F, where alloys 800H and 800HT are normally used in temperatures above 1100° F where resistance to creep and rupture is required. The chemical balance allows the nickel steel alloy to exhibit excellent resistance to carburization, oxidation and nitriding atmospheres. Incoloy 800HT will not become embrittled even after long periods of usage in the 1200-1600° F range where many stainless steels become brittle. Excellent cold forming characteristics typically associated with the nickel-chromium alloys are exhibited with 800HT. When cold formed extensively the grain size produces a visibly undulated surface called "orange peel”. Incoloy 800HT can be welded by the common techniques used on stainless steels.
Inconel 800 or Incoloy 800, or perhaps even 800H or 800HT. Inconel 800 goes by many names and carries with it a few variations. Incoloy 800 originally developed by Special Metals has been around since the 1950s but back then, Nickel wasn't as widely available and really only used for special cases when producing certain steels. This grade has always been known to contain properties for high temp strength and resistance to carburization, oxidation and other high temp corrosion.
The variations of this grade come in 2 forms, Incoloy 800H and Incoloy 800HT. The 800 variety has a higher level of Carbon than the straight 800 counterpart which allows for a higher creep. Incoloy 800 HT features a restricted elemental structure that is within standard 800H chemistry but also requires heat treating. The variation of the Carbon, Aluminum and Titanium give the 3 grades of 800, 800H and 800 HT similar properties but not 100% the same, thus the need to split out this group into 3 alloys.
Incoloy refers to a range of superalloys produced by the Special Metals Corporation group of companies. They are mostly nickel-based, and designed for excellent corrosion resistance as well as strength at high temperatures; there are specific alloys for resistance to particular chemical attacks (e.g. alloy 020 is designed to be resistant to sulphuric acid, DS to be used in heat-treating furnaces with reactive atmospheres and many heat cycles)
Alloys of identical chemical and mechanical properties are available from other manufacturers and offer excellent alternatives to the various Incoloy brand alloys.The corrosion-resistant superalloys are widely used in extreme environments where tremendous heat and corrosion resistance is paramount to the integrity of the end product. Chemical and petrochemical processing, power plants, and oil and gas industries widely use these superalloys.
| Standard | ASTM,AISI, AMS,MLS,EN,JIS,DIN,GOSTASTM / ASME SB 162 UNS 2200 (NICKEL 200) / UNS 2201 (NICKEL 201 ASTM / ASME SB 127UNS 4400 (MONEL 400) ASTM / ASME SB 424 UNS 8825 (INCONEL 825) ASTM / ASME SB 168 UNS 6600 (INCONEL 600) / UNS 6601 (INCONEL 601) ASTM / ASME SB 443 UNS 6625 (INCONEL 625) ASTM / ASME SB 574 UNS 10276 (HASTELLOY C 276) ASTM / ASME SB 462 UNS 8020 (ALLOY 20 / 20 CB 3) |
| Thickness | 1.2-100mm |
| Width | 1000-1500mm |
| Length | 1000-6000mm |
| Surface | 2B, No.3, No.4, HL, BA, 8K |
| Manufacturing process | Hot rolled, cold rolled |
| Grades Available | A330 Plate,Alloy 20 Plate, Alloy 400 Plate, Alloy 625 Plate, Alloy 825 Plate, Hastelloy B-2 Plate, Hastelloy B-3 Plate. Hastelloy C-22 Plate, Hastelloy C-276 Plate, Hastelloy X Plate, Incoloy 800 Plate, Incoloy 825 Plate, Inconel 600 Plate, Inconel 601 Plate, Inconel 617 Plate, Inconel 622 Plate, Inconel 625 plate, Inconel 690 Plate, Inconel 718 Plate, Inconel 800 Plate, Monel 400 Plate, Monel K500 Plate, Nickel 200 Plate, Nickel 201 Plate, Nicrofer 59 Plate |
| Packing | bubble bag and plywood pallet or according to the customers’ requirements. |
| Export To: | Saudi arabia, Kuwait, Qatar, Oman, Yemen, UAE, Iran, Turkey, Kazakhstan, Greece, Singapore, Thailand, Indonesia, Vietnam, South Africa,South America,Brazil, India, Australia, Egypt. |
| Ni | Cr | Fe | C | Al | Ti | Al+Ti |
|---|---|---|---|---|---|---|
| 30.0-35.0 | 19.0-23.0 | 39.5 min | .10 max | .15-.60 | .15-.60 | .30-1.20 |
| Ni | Cr | Fe | C | Al | Ti | Al+Ti |
|---|---|---|---|---|---|---|
| 30.0-35.0 | 19.0-23.0 | 39.5 min | .05-.10 | .15-.60 | .15-.60 | .30-1.20 |
| Ni | Cr | Fe | C | Al | Ti | Al+Ti |
|---|---|---|---|---|---|---|
| 30.0-35.0 | 19.0-23.0 | 39.5 min | .06-.10 | .25-.60 | .25-.60 | 0.85-1.2 |
*Note that the chemical composition of Incoloy 800HT will always be within the limits of Incoloy 800H.
*Note the limits of Incoloy 800H may or may not be within the limits of Incoloy 800HT.
| Temperature, °F | 70-200 | 70-300 | 70-400 | 70-500 | 70-600 | 70-800 | 70-1000 | 70-1200 | 70-1400 |
| µm/°F | 7.9 | 8.4 | 8.6 | 8.8 | 9.0 | 9.2 | 9.4 | 9.6 | 9.9 |
| Temperature, °F | 70 | 70-800 | 70-1800 |
| Btu/h-ft-°F | 6.7 | 10.6 | 17.8 |
| Temperature, °F | 70 | 1000 | 1200 | 1400 | 1600 | 1800 |
| 0.2% Yield Strength, psi | 29,000 | 16,500 | 14,800 | 14,400 | 11,600 | 8,900 |
| 0.2% Yield Strength, MPa | 200 | 114 | 102 | 99 | 80 | 61 |
| Ultimate Tensile Strength, pso | 77,000 | 63,500 | 55,700 | 32,300 | 18,600 | 10,200 |
| Ultimate Tensile Strength, MPa | 531 | 438 | 384 | 223 | 128 | 70 |
| Elongation, % | 52 | 51 | 50 | 78 | 120 | 120 |
Incoloy 800 / 800H / 800HT Sheets Plates Packaging
Inconel 800 / 800H / 800HT Plates, Sheets, Coil are Packed in Wooden Pallet, wooden Box and Carrate
we provide high Quality Packing so the Incoloy 800 / 800H / 800HT Plates, Sheets and Coil will remain safe during shipment and transportation
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 800 | 1.4876 | N08800 | NCF 800 | NA 15 | ЭИ670 | Z8NC32-21 | X10NiCrAlTi32-20 | XH32T |
| Incoloy 800H | 1.4958 / 1.4876 | N08810 | NCF 800H | NA 15(H) | ЭИ670 | Z8NC33-21 | X5NiCrAlTi31-20 | XH32T |
| Incoloy 800HT | 1.4859 / 1.4876 | N08811 | NCF 800HT | NA 15(HT) | ЭИ670 | - | X8NiCrAlTi32-21 | XH32T |
